- The W1209 Temperature Controller provides 100% complete machine patch, wave soldering, stable performance and good consistency.
- The W1209 Temperature Controller is an embedded CPU chip (MCU), more intelligent and lower power consumption.
- The temperature controller features an automatic memory setting for power failure (built-in EEPROM storage unit in MCU).
- The W1209 Digital Temperature Controller has control precision of 0.1 degree Celsius. Key Product Features
- Set the return difference of 0.1 and control the decimal (0.1-15.0).
- Specifications:Temperature range :-50-110 ?Dimensions: 48.5 * 40mmTemperature control mode: ON / OFFResolution:When temperature is 0.1?, the resolution is -9.9~99.9, other temperature segment is 1?
Control accuracy: 0.1 ?
Hysteresis accuracy: 0.1?
Refresh rate: 0.5S
High temperature protection: 0-110?
Supply voltage: DC 12V
Static current: �35MA, attract current �65MA
Output voltage: DC 12V
Output power: 20A relay
MZON W1209 Digital Temperature Controller Thermostat (Pack of 5) MZON QUALITY
₹799.00
Instructions for use:
Connect the power supply and equipment, the measuring temperature is displayed, press the “SET” button, press ” + or – ” to set the desired temperature (long press ” + or – ” to quickly increase or decrease), press “SET” to confirm the setting and return, controller
automatically performs the relay ON/OFF.the thermostat output is 10A relay, meet a variety of high-power loads,
LED Indicator: LED off indicates the relay off; Lighting,indicates the relay is closed.
Digital LED Tubes: “LL” indicates sensor open, “HH” indicates overrange, the relay will be forcibly disconnected; “—” indicates high temperature alarm
Long press the “SET” button to enter the main menu settings, press ” + or – ” to switching between P0-P6,then long press “SET” or 10 seconds without keystrokes to confirm the setting and return.
Buttons:
P0 :Cooling / Heating; Range: C/H; Default: C
P1 :Hysteresis Setting; Range:0.1-15; Default: 2
P2 :Highest Setting Limit; Range:110; Default: 110
P3: Lowest setting Limit; Range:-50; Default: -50
P4 :Temperature Correction; Range:-7-7°c; Default: 0°c
P5: Delay Start Time; Range:0-10 Minute; Default: 0
P6: Key Tone Switch; Range:0-110; Default: Off
When the Thermostat is power off, long press “- or +”, you can restore the factory settings
Weight | 455 g |
---|---|
Dimensions | 53 × 23 × 9 cm |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.